久久国产加勒比精品无码,男女高潮又爽又黄又无遮挡,国产精品揄拍100视频,亚洲18色成人网站WWW

雙極性晶體管

二極管

ESD保護、TVS、濾波和信號調節ESD保護

MOSFET

氮化鎵場效應晶體管(GaN FET)

絕緣柵雙極晶體管(IGBTs)

模擬和邏輯IC

汽車應用認證產品(AEC-Q100/Q101)

74LVCH16244AEV

16-bit buffer/line driver; 5 V input/output tolerant; 3-state

The 74LVC16244A; 74LVCH16244A is a 16-bit buffer/line driver with 3-state outputs. The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer. The device features four output enables (1OE, 2OE, 3OE and 4OE), each controlling four of the 3-state outputs. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments. Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times. This device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down.

The 74LVCH16244A bus hold on data inputs eliminates the need for external pull-up resistors to hold unused inputs.

此產品已停產

Features and benefits

  • Wide supply voltage range from 1.2 V to 3.6 V

  • 5 V tolerant inputs/outputs for interfacing with 5 V logic

  • IOFF circuitry provides partial Power-down mode operation

  • CMOS low power consumption

  • Multibyte flow-through standard pin-out architecture

  • Low inductance multiple power and ground pins for minimum noise and ground bounce

  • Direct interface with TTL levels

  • High-impedance when VCC = 0 V

  • All data inputs have bus hold. (74LVCH16244A only)

  • Complies with JEDEC standard:

    • JESD8-7A (1.65 V to 1.95 V)

    • JESD8-5A (2.3 V to 2.7 V)

    • JESD8-C/JESD36 (2.7 V to 3.6 V)

  • ESD protection:

    • HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V

    • CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

  • Specified from -40 °C to +85 °C and -40 °C to +125 °C

參數類型

型號 Package name
74LVCH16244AEV VFBGA56

封裝

下表中的所有產品型號均已停產 。

型號 可訂購的器件編號,(訂購碼(12NC)) 狀態 標示 封裝 外形圖 回流焊/波峰焊 包裝
74LVCH16244AEV 74LVCH16244AEV,118
(935270792118)
Obsolete LVCH16244A Standard Procedure Standard Procedure no package information
74LVCH16244AEV,151
(935270792151)
Obsolete LVCH16244A Standard Procedure Standard Procedure
74LVCH16244AEV,157
(935270792157)
Obsolete LVCH16244A Standard Procedure Standard Procedure
74LVCH16244AEV,518
(935270792518)
Obsolete LVCH16244A Standard Procedure Standard Procedure
74LVCH16244AEVE
(935270792551)
Obsolete LVCH16244A Standard Procedure Standard Procedure
74LVCH16244AEVK
(935270792557)
Obsolete LVCH16244A Standard Procedure Standard Procedure
74LVCH16244AEV/G;5
(935281129518)
Obsolete LVCH16244A Standard Procedure Standard Procedure
74LVCH16244AEV/G,5
(935281129551)
Obsolete LVCH16244A Standard Procedure Standard Procedure
74LVCH16244AEV/G:5
(935281129557)
Obsolete LVCH16244A Standard Procedure Standard Procedure

環境信息

下表中的所有產品型號均已停產 。

型號 可訂購的器件編號 化學成分 RoHS RHF指示符
74LVCH16244AEV 74LVCH16244AEV,118 74LVCH16244AEV rhf
74LVCH16244AEV 74LVCH16244AEV,151 74LVCH16244AEV rhf
74LVCH16244AEV 74LVCH16244AEV,157 74LVCH16244AEV rhf
74LVCH16244AEV 74LVCH16244AEV,518 74LVCH16244AEV rhf
74LVCH16244AEV 74LVCH16244AEVE 74LVCH16244AEV rhf
74LVCH16244AEV 74LVCH16244AEVK 74LVCH16244AEV rhf
74LVCH16244AEV 74LVCH16244AEV/G;5 74LVCH16244AEV rohs rhf rhf
74LVCH16244AEV 74LVCH16244AEV/G,5 74LVCH16244AEV rohs rhf rhf
74LVCH16244AEV 74LVCH16244AEV/G:5 74LVCH16244AEV rohs rhf rhf
品質及可靠性免責聲明

文檔 (4)

文件名稱 標題 類型 日期
74LVC_LVCH16244A 16-bit buffer/line driver; 5 V input/output tolerant; 3-state Data sheet 2024-04-09
AN11009 Pin FMEA for LVC family Application note 2019-01-09
AN263 Power considerations when using CMOS and BiCMOS logic devices Application note 2023-02-07
lvch16244a lvch16244a IBIS model IBIS model 2013-04-09

支持

如果您需要設計/技術支持,請告知我們并填寫 應答表 我們會盡快回復您。

模型

文件名稱 標題 類型 日期
lvch16244a lvch16244a IBIS model IBIS model 2013-04-09

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.