Register once, drag and drop ECAD models into your CAD tool and speed up your design.
Click here for more informationPMBD354
Schottky barrier double diode
Planar Schottky barrier double diode in a SOT23 small plastic SMD package.
Features and benefits
Low forward voltage
Small SMD package
Low capacitance
Matched capacitance.
AEC-Q101 qualified
Applications
UHF mixer
Sampling circuits
Modulators
Phase detection.
參數類型
型號 | Package version | Package name | Size (mm) | VR [max] (V) | Configuration | VF [max] (mV) | Cd [max] (pF) | IR [max] (mA) |
---|---|---|---|---|---|---|---|---|
PMBD354 | SOT23 | SOT23 | 2.9 x 1.3 x 1 | 4 | series connected | 600@IF=10mA | 1@VR=0V | 0.25@VR=3V |
封裝
下表中的所有產品型號均已停產 。
型號 | 可訂購的器件編號,(訂購碼(12NC)) | 狀態 | 標示 | 封裝 | 外形圖 | 回流焊/波峰焊 | 包裝 |
---|---|---|---|---|---|---|---|
PMBD354 | PMBD354,215 (934057257215) |
Discontinued / End-of-life | %V8 |
(SOT23) |
SOT23 |
REFLOW_BG-BD-1
WAVE_BG-BD-1 |
SOT23_215 |
文檔 (10)
文件名稱 | 標題 | 類型 | 日期 |
---|---|---|---|
PMBD354 | Schottky barrier double diode | Data sheet | 2003-03-24 |
SOT23 | 3D model for products with SOT23 package | Design support | 2019-01-22 |
Nexperia_package_poster | Nexperia package poster | Leaflet | 2020-05-15 |
SOT23_mk | plastic, surface-mounted package; 3 terminals; 1.9 mm pitch; 2.9 mm x 1.3 mm x 1 mm body | Marcom graphics | 2017-01-28 |
SOT23 | plastic, surface-mounted package; 3 terminals; 1.9 mm pitch; 2.9 mm x 1.3 mm x 1 mm body | Package information | 2022-10-12 |
PMBD354_Nexperia_Product_Reliability | PMBD354 Nexperia Product Reliability | Quality document | 2024-04-22 |
REFLOW_BG-BD-1 | Reflow soldering profile | Reflow soldering | 2021-04-06 |
PMBD354 | PMBD354 SPICE model | SPICE model | 2012-07-22 |
PMBD354 | PMBD354 SPICE model | SPICE model | 2024-10-14 |
WAVE_BG-BD-1 | Wave soldering profile | Wave soldering | 2021-09-08 |
支持
如果您需要設計/技術支持,請告知我們并填寫 應答表 我們會盡快回復您。
How does it work?
The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.