可訂購部件
型號 | 可訂購的器件編號 | 訂購代碼(12NC) | 封裝 | 從經銷商處購買 |
---|---|---|---|---|
74ALVCH16825DGG | 74ALVCH16825DGG:11 | 935259050118 | SOT364-1 | 訂單產品 |
Register once, drag and drop ECAD models into your CAD tool and speed up your design.
Click here for more information18-bit buffer/driver; 3-state
The 74ALVCH16825 is an 18–bit non-inverting buffer/driver with 3-state outputs for bus-oriented applications. The 74ALVCH16825 consists of two 9-bit sections with separate output enable signals. For either 9-bit buffer section, the two output enable (1OE1 and 1OE2 or 2OE1 and 2OE2) inputs must both be LOW for corresponding nYn outputs to be active. If either output enable input is HIGH, the outputs of that 9-buffer section are in the high impedance state.
The 74ALVCH16825 has active bus hold circuitry which is provided to hold unused or floating data inputs at a valid logic level. This feature eliminates the need for external pull-up or pull-down resistors.
Wide supply voltage range of 1.2 V to 3.6 V
CMOS low power dissipation
MULTIBYTE? flow-through standard pin-out architecture
Low inductance multiple VCC and GND pins for minimum noise and ground bounce
Direct interface with TTL levels
Bus hold on data inputs
Output drive capability 50 ? transmission lines at 85 °C
Current drive ± 24 mA at 3.0 V
Latch-up performance exceeds 250 mA per JESD 78 Class II.A
Complies with JEDEC standards:
JESD8-7 (1.65 V to 1.95 V)
JESD8-5 (2.3 V to 2.7 V)
JESD8C/JESD36 (2.7 V to 3.6 V)
HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V
CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V
Specified from -40 °C to +85 °C
型號 | VCC (V) | Logic switching levels | Output drive capability (mA) | fmax (MHz) | Nr of bits | Power dissipation considerations | Tamb (°C) | Package name |
---|---|---|---|---|---|---|---|---|
74ALVCH16825DGG | 1.2?-?3.6 | LVTTL | ± 24 | 150 | 18 | low | -40~85 | TSSOP56 |
型號 | 可訂購的器件編號,(訂購碼(12NC)) | 狀態 | 標示 | 封裝 | 外形圖 | 回流焊/波峰焊 | 包裝 |
---|---|---|---|---|---|---|---|
74ALVCH16825DGG | 74ALVCH16825DGG:11 (935259050118) |
Active | ALVCH16825 |
TSSOP56 (SOT364-1) |
SOT364-1 |
SSOP-TSSOP-VSO-WAVE
|
SOT364-1_118 |
下表中的所有產品型號均已停產 。
型號 | 可訂購的器件編號,(訂購碼(12NC)) | 狀態 | 標示 | 封裝 | 外形圖 | 回流焊/波峰焊 | 包裝 |
---|---|---|---|---|---|---|---|
74ALVCH16825DGG | 74ALVCH16825DGGY (935259050518) |
Withdrawn / End-of-life | ALVCH16825 |
TSSOP56 (SOT364-1) |
SOT364-1 |
SSOP-TSSOP-VSO-WAVE
|
暫無信息 |
型號 | 可訂購的器件編號 | 化學成分 | RoHS | RHF指示符 |
---|---|---|---|---|
74ALVCH16825DGG | 74ALVCH16825DGG:11 | 74ALVCH16825DGG |
下表中的所有產品型號均已停產 。
型號 | 可訂購的器件編號 | 化學成分 | RoHS | RHF指示符 |
---|---|---|---|---|
74ALVCH16825DGG | 74ALVCH16825DGGY | 74ALVCH16825DGG |
文件名稱 | 標題 | 類型 | 日期 |
---|---|---|---|
74ALVCH16825 | 18-bit buffer/driver; 3-state | Data sheet | 2024-07-10 |
SOT364-1 | 3D model for products with SOT364-1 package | Design support | 2020-01-22 |
alvch16825 | alvch16825 IBIS model | IBIS model | 2013-04-08 |
Nexperia_package_poster | Nexperia package poster | Leaflet | 2020-05-15 |
SOT364-1 | plastic, thin shrink small outline package; 56 leads; 0.5 mm pitch; 14 mm x 6.1 mm x 1.2 mm body | Package information | 2022-06-23 |
SOT364-1_118 | TSSOP56; Reel pack for SMD, 13"; Q1/T1 product orientation | Packing information | 2020-04-21 |
74ALVCH16825DGG_Nexperia_Product_Reliability | 74ALVCH16825DGG Nexperia Product Reliability | Quality document | 2024-06-16 |
SSOP-TSSOP-VSO-WAVE | Footprint for wave soldering | Wave soldering | 2009-10-08 |
如果您需要設計/技術支持,請告知我們并填寫 應答表 我們會盡快回復您。
文件名稱 | 標題 | 類型 | 日期 |
---|---|---|---|
alvch16825 | alvch16825 IBIS model | IBIS model | 2013-04-08 |
SOT364-1 | 3D model for products with SOT364-1 package | Design support | 2020-01-22 |
型號 | Orderable part number | Ordering code (12NC) | 狀態 | 包裝 | Packing Quantity | 在線購買 |
---|---|---|---|---|---|---|
74ALVCH16825DGG | 74ALVCH16825DGG:11 | 935259050118 | Active | SOT364-1_118 | 2,000 | 訂單產品 |
作為 Nexperia 的客戶,您可以通過我們的銷售機構訂購樣品。
如果您沒有 Nexperia 的直接賬戶,我們的全球和地區分銷商網絡可為您提供 Nexperia 樣品支持。查看官方經銷商列表。
The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.